Automobile Air Conditioning Filter Four Side Production Line

DSC01995--NR

DSC02028--NR

Details:

4-Sides Edge Banding Machine （V4)
- This machine is mainly used in the edge and trimming process of square filter elements such as cabin air filter .It only one worker to run, when the input speed is fast enough, the machine can produce a filter every 7 seconds at the fastest speed. Workers only need to put the pleat pack into the fixture, and the edge banding and trimming are automatically completed by the machine.
Applied to edge banding and trimming process, completed 4-sides or 2-sides edge banding in one machin

Send Inquiry

Download

Description

Technical Parameters

Automobile Air Conditioning Filter Paste Four-Side Production Line

product-1170-533

Specification

1. Product ranges: length: 150～400mm; width: 150～350mm
2. Scraping width: 12～50mm
3. Voltage: 220V/380V; air pressure: 0.6Mpa; power: 30KW; Weight: 1200KG
4. Action time of a single group of equipment: ≤7S
5. Eequipment footprint size: (L*W*H): 19000x3000x2000mm
6. Number of equipment operators: mold feeding (manual filter element discharge) ≥1
7. Number of circulating molds: ≥18
8. The equipment replacement time should be 0.5 hours

Decive Reference View

Production Line Front View

product-1394-496

Production Line Top View

product-1385-370

Eequipment structure introduction: Long side

Introduction of Each Organization

product-1424-483

Process Flow:

1. Operator loads products onto the shaping mold one by one.

2. Place filter onto conveyor line, automatic correction and edge attachment.

3. Automated trimming after edge attachment.

4. Separated products enter automatic demolding mechanism.

5. Molds return to work platform via elevator convey.

6. Automated precision trimming after demolding.

7. Ready for collection on conveyor line.

Equipment Size Description

product-1295-582

The equipment consists of eight parts, which can be detachable, each of which does not exceed 2.5 meters in length.

Eequipment structure introduction: Short side

Introduction of Each Organization

product-1320-574

Process Flow:

1. Products placed on feed conveyor belt.

2. Sensing priduct -- edge scraping -- edge banding.

3. The insert mechanism is inserted into the product and moves in the opposite direction of the welt, so that the front and back pages of the product are firmly attached to the edge strip.

4. The coarse trimming separation mechanism will cut the products one by one and separate them.

5. The precision mechanism performs fine cutting on the product.

6. Finished products exit via output conveyor belt.